TECHNOFLAME

(N)HXCH FE180 PH90/E90 0.6/1 kV

APPLICATION

Fire-resistant power cables (N)HXCH FE180 PH90/E90 0.6/1 kV with halogen-free insulation and outer sheath are designed to supply fire protection equipment intended to operate during fire conditions (e.g., power supply for fire protection water pumps, smoke extraction fans).

These cables are dedicated to installations in buildings and facilities with increased fire safety requirements, where enhanced protection of people and valuable electronic equipment is essential (such as metro tunnels, hospitals, shopping centers, supermarkets, cinemas, theatres, stadiums, and other public buildings).

The cables ensure circuit integrity for 90 minutes, meaning they maintain the supply of electrical power to equipment necessary during evacuation and firefighting operations (e.g., fire protection water pumps, smoke extraction fans, smoke dampers, emergency and evacuation lighting, firefighter lifts).

The cables hold a Certificate of Conformity and a Certificate of Approval issued by the Scientific and Research Centre for Fire Protection – National Research Institute (CNBOP-PIB) in Józefów.

The cables do not propagate flame, produce very low smoke emissions, and the gases released are non-toxic and non-corrosive.

They are intended for permanent installation inside and outside buildings. The cable sheath is resistant to UV radiation. With additional protection against water and moisture, the cables may also be installed in water and directly in the ground.